NEC VE280 Page 65 User Manual Download

Page: 65 / 88

5. Using On-Screen Menu

[INSTALLATION]

[VE280X/VE280/VE281X/VE281]

[VE282X/VE282]

Selecting Projector Orientation [ORIENTATION]

This reorients your image for your type of projection. The options are: desktop front projection, ceiling rear projection,

desktop rear projection, and ceiling front projection.

DESKTOP FRONT

CEILING REAR

DESKTOP REAR

CEILING FRONT

Disabling the Cabinet Buttons [CONTROL PANEL LOCK]

This option turns on or off the CONTROL PANEL LOCK function.

NOTE:

• This CONTROL PANEL LOCK does not affect the remote control functions.

• When the control panel is locked, pressing and holding the SOURCE button on the projector cabinet for about 10 seconds will

change the setting to [OFF].

Selecting Communication Speed [COMMUNICATION SPEED] (VE280X/VE280/VE281X/VE281)

This feature sets the baud rate of the PC Control port (D-Sub 9P). It supports data rates from 4800 to 38400 bps.

The default is 38400 bps. Select the appropriate baud rate for your equipment to be connected (depending on the

equipment, a lower baud rate may be recommended for long cable runs).

NOTE: Your selected communication speed will not be affected even when [RESET] is done from the menu.

Summary of Contents for VE280

























































































Search results

Summary of Contents for VE280

Reviews:

Related manuals for VE280

Brands by name

Popular brands

NEC VE280, User Manual

Search results

Summary of Contents for VE280

Reviews:

Related manuals for VE280

Brands by name

Popular brands