NEC UX5000, Manual

Page: 358 / 588

Customize
Dial Action Tables
340
◆
Chapter 3: Programming UX Mail Manual
FAX1
Not used.
FAX2
Not used.
FAX1C
Not used.
FAX1U
Not used.
FAX2C
Not used.
FAX2U
Not used.
MTRF Action – Monitored (Ring No Answer) Transfer
Use this key action to allow an Automated Attendant caller to place a Monitored Transfer to an extension.
With Monitored Transfer, after an Automated Attendant caller dials an extension voice mail checks the sta-
tus of the called extension.
If the called extension is idle , voice mail rings the extension (similar to an
Unscreened Transfer). If the called extension is busy or in DND , voice mail sends the caller directly to the
called extension’s mailbox (similar to a Screened Transfer).
Number Option
● Normally, to reach extensions that have mailboxes, the corresponding Number option should be XXX.
Note that the key you choose for this action is the first digit of the called extension number.
- For example, to allow callers to place Monitored Transfers to 300-399, for key 3 enter MTRF in the
Action field and XXX in the Number field.
● If the destination extension does not have a mailbox defined, the corresponding Number option should
be enclosed in square brackets as follows:
- {XXX} for fixed length extension numbers.
- {IV} for variable length extension numbers.
Additional Information
● See the detailed Monitored Transfer Operation call routing chart on page 230.
● Also see
S
CREENED
T
RANSFER
(
PAGE
270)
,
M
ONITORED
T
RANSFER
(
PAGE
230)
and
U
NSCREENED
T
RANSFER
(
PAGE
299)
.