NEC UX5000, Manual

Page: 26 / 588

Programming
8
◆
Installation UX Mail Manual
Programming
UX Mail Programming
Basic Setup
16-02-01: D
EPARTMENT
G
ROUP
A
SSIGNMENT FOR
E
XTENSIONS
Assign the UX Mail extensions to a unique Department Group (e.g., 2 ).
- These are the extensions automatically assigned by the system to the UX Mail blade. The
extensions should be consecutive.
- No other extensions should be in this group.
- Do not use Department Group 1.
- Be sure to set up the Department Group in order. (For example, the first extension should be
order 1, the second order 2, etc.).
✔
By default, all extensions are in Department Group 1.
11-07-01: D
EPARTMENT
G
ROUP
P
ILOT
N
UMBERS
Assign the Pilot Number for the UX Mail Department Group (e.g., 700 ).
✔
By default, there are no Pilot Numbers assigned.
45-01-01: V
OICE
M
AIL
I
NTEGRATION
O
PTIONS
, V
OICE
M
AIL
D
EPARTMENT
G
ROUP
N
UMBER
Enter the Department Group you assigned in step 1 above (e.g., 2 ).
✔
By default, there is no Department Group assigned.
15-03-01: S
INGLE
L
INE
T
ELEPHONE
B
ASIC
D
ATA
S
ETUP
- SLT S
IGNALING
T
YPE
For each UX Mail extension, enter 0 (DP).
✔
By default, this option is 1 (DTMF).
15-03-03: S
INGLE
L
INE
T
ELEPHONE
B
ASIC
D
ATA
S
ETUP
- T
ERMINAL
T
YPE
For each UX Mail extension, enter 1 .
- This allows UX Mail to receive voice mail commands dialed from system extensions.
✔
By default, this option is 0.
15-07-01: P
ROGRAMMING
F
UNCTION
K
EYS
Voice Mail keys are code 77 .
The additional data is normally the number of the extension you are programming.
- Keysets can also have Voice Mail keys for Virtual Extensions, a co-worker, or an uninstalled
extension (for Message Center operation).
- Extension users can use Service Code 851 to set up their own Voice Mail keys.
✔
By default, there are no Voice Mail keys assigned.
1. Assign the UX Mail extension numbers to a unique Department Group.
2. Assign a master number to the UX Mail Department Group.
3. Specify the Department Group used for UX Mail.
4. Set the dialing type to Dial Pulse (DP) for each UX Mail extension.
5. Set the terminal type for each UX Mail extension.
6. Program Voice Mail keys on system extensions.