NEC UX5000 Installation Manual Download Page 57

Page: 57 / 86

UX5000

Issue 1.0

Multimedia Conference Bridge Installation Manual

5 - 29

___________________________________________________________________________________

6.1.5

Log Settings (Debug Levels)

6.1.5.1

Set Log Levels

The

Set Log Levels

window allows the installer to configure

how much information should be sent to the debug log.

This window is used for analyzing any communication errors,
and is intended for use by technical support personnel.

There are three components of the conference bridge for which
the log levels can be set. These include:

❍

Interface Log Level

❍

Application Log Level

❍

Engine Log Level

✎

The maximum size of the rotation log is 1 MB.

The three components can be set to one of the following log
levels. Log messages are categorized from highest level to
lowest as listed below:

❍

None = no messages are logged.

❍

Error = all error messages are logged.

❍

Warning = all warning and error messages are logged.

❍

Information = all information, warning and error messages
are logged.

❍

Debug = all levels of messages are logged when ‘debug’
level is set .

Figure 5-21 Set Log Levels Window

Summary of Contents for UX5000























































































Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands

NEC UX5000, Installation Manual

Search results

Summary of Contents for UX5000

Reviews:

Related manuals for UX5000

Brands by name

Popular brands