2 - 4
Multimedia Conference Bridge Application
___________________________________________________________________________________
___________________________________________________________________________________
Issue 1.0
UX5000
2.2
Connectors
Ethernet Connector
The Multimedia Conference Bridge Application has a single 10/100 MPS
Ethernet connector. The port has Auto-MDIX (Auto-Medium Dependent
Interface Crossover) giving users the ability use either a straight-through
Ethernet cable or a crossover Ethernet cable. A crossover cable is not
required for direct connection to a PC.
The Ethernet Interface setting allows for manual configuration of the
Ethernet port mode/speed from the Web Interface. This can be set to
operate in the following port speed and duplex mode: 10MB/Full Duplex,
10MB/Half Duplex, 100MB/Half Duplex, 100MB Full Duplex,
Auto-Negotiate.
Serial Connector
A 10-pin header (J2) provides access to a serial terminal on the
Multimedia Conference Bridge Application blade. The serial connector
is used for debug operations only.
2.3
Environmental Conditions
The following environmental conditions apply for the operation:
Operating Temperature: +32
°
to 104
°
F (0
°
to 40
°
C)
Operating Humidity:
10% to 90% (non-condensing)