C
ISCO
C
ALL
M
ANAGER
43
Changing the
number of
uOne ports
To change the number of uOne ports after the CallManager is installed and set up,
perform the following procedures.
To change the number of uOne ports in CallManager
1
On the CallManager server, use the Cisco CallManager Administration
program to add or remove uOne lines, as appropriate.
For information on adding uOne ports, see “
” on page 32. For information on removing uOne
ports, see the Cisco CallManager Administration online Help.
2
Shut down and restart the CallManager server.
3
Continue with the next procedure.
To change the number of uOne ports for the Cisco Unity-
CM TAPI Service Provider
1
On the messaging system server, log on to Windows as an administrator.
2
On the Windows taskbar click
Start> Control Panel
.
3
Double-click
Phone and Modem Options
. The Phone and Modem
Options dialog box appears.
4
Click the
Advanced
tab.
5
Click
Cisco Unity-CM TSP
, then click
Configure
. The Cisco Unity-CM TSP
dialog box appears.
6
Select the IP address of the CallManager server on which uOne ports were
added.
7
Click
Settings
. The Cisco Unity-CM TSP Settings dialog box appears.
8
Change the
Number of voice ports
to the number of uOne ports currently
configured in the Cisco CallManager Administration program.
9
Click
OK
to close the Cisco Unity-CM TSP Settings dialog box.
10
Click
Close
to close the Phone and Modem Options dialog box.
11
Shut down and restart the messaging system server.
Summary of Contents for UNIVERGE UM8500
