manualshive.com logo in svg

NEC Univerge UM8000, Installation Manual

Share
Download
NEC Univerge UM8000 Installation Manual Download Page 118

Issue No. 1.0

UM8000

13 - 12

Database Migration

1.5.1.3

Setting Up Share-Level Access for NT, 2000 or XP

1.

On the Windows Desktop, double-click the 

My 

Computer

 icon.

2.

Right-click the drive or directory to share with the OS/
2 voice messaging system, then choose 

Sharing

.

3.

Select the 

Share this folder 

field, then set the 

appropriate Share name.

4.

If sharing drive C, do not use the default C$setting. 
Instead, select 

New Share

 and create a new sharing 

profile.

5.

Click 

Permissions

, click 

Everyone

, then click 

Remove

.

6.

In the Permissions dialog box, click 

Add

, then add the 

Guest or the new user account set up in the previous 
procedure. 

7.

Set up the read/write privileges for the user account, 
then click 

Apply

.

S

ECTION

 2 

M

IGRATING

 

FROM

 

A

 DOS V

OICE

 M

ESSAGING

 S

YSTEM

2.1

About Migration

UM8000 supports migration from previous products. This chapter describes the 
steps required to migrate data from a DOS voice messaging system to Linux. 

You can migrate most existing data from a DOS voice messaging system into a 
new UM8000 system. This includes the system database (system configuration 
settings, subscriber accounts, groups, transaction boxes and interview boxes), 
and all messages, voice names and greetings. Customized prompts cannot be 
migrated.

2.1.1

Migration Setup Steps

Migrating from DOS to Linux requires the following steps. Complete 
instructions for each step are included in this chapter.

1.

Back up and compress the a DOS voice messaging system 
data.

Refer to Section 

2.2 Backing Up a DOS Voice Messaging System 

on page 13-13

 in this chapter.

2.

Transfer compressed back up data to a support computer.

3.

Remove the a DOS voice messaging system blade.

Summary of Contents for Univerge UM8000



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands