FEATURE OPERATION
67
TO ANSWER
1.
Press Answer key.
Call in progress is placed on hold.
A hold tone is not transmitted to the other party of
the original call.
Calling terminal and called terminal can privately
speak.
Answer key lamp lights red.
2.
Press Answer key.
Answer key lamp goes off.
Return to original call.
SYSTEM CLOCK SETUP BY
STATION DIALING
This feature enables a terminal user to adjust the system clock.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Dial System Clock Setup access code or press
System Clock Setup feature key.
You will receive a feature dial tone.
3.
Dial new time in 24 hr. format using 6 digits
(HHMMSS).
You will receive a service set tone.
4.
Press Speaker key.
Speaker key lamp goes off.
DAY/NIGHT MODE CHANGE BY
STATION DIALING
This feature allows selected terminals to activate a change from
day mode to night mode by dialing a special code.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system administrator.
1.
Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red.
2.
Dial Day/Night Mode Change access code or
press Day/Night Mode Change feature key.
3.
Press “1” –“4” and set in various mode.
Press for DAY mode.
Press for NIGHT mode.
Press for MODE-A mode.
Press for MODE-B mode.
4.
Press Speaker key.
Speaker key lamp goes off.
If a programmable key is used lamp
indication will be,
•
Night Mode = Red lamp on Mode-A = Red
lamp flashing (60 ipm)
•
Mode-B = Red lamp flashing (120 ipm)