NEC Univerge SV9300, Networking Manual, Page: 308 / 364

Chapter 2 Q-SIG FEATURES
2-32
NWA-088654-001 Rev.1.0
94ch2001.fm
OVERLAP RECEIVING-Q-SIG
OVERLAP RECEIVING-Q-SIG
[For EMEA/Russia]
DESCRIPTION DATA
Assign the Station Numbering Plan data to the
leading one, two, three or four digits of station
number. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Leading 1-4 digits of Station
No.
801: 1 digit Station No.
802: 2 digits Station No.
803: 3 digits Station No.
804: 4 digits Station No.
805: 5 digits Station No.
806: 6 digits Station No.
807: 7 digits Station No.
808: 8 digits Station No.
Assign the access code for LCR Group 0-3. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
Assign an Area Code Development Pattern
number to each LCR Group. •
(1)
(2)
Y=A000
0-3: LCR Group 0-3
4000-4007: Area Code Development Pat-
tern No. 0-7
Assign a Route Pattern number to each area
code for the Area Code Development Pattern
number assigned by CM8A Y=A000. •
(1)
(2)
Y=4000-4007 Area Code Development
Pattern No. 0-7
X-X...X: Area Code, Maximum 8 digits
0000-0255: Route Pattern No. 000-255
START
CM20
CM8A
A