NEC Univerge SV9300, Networking Manual, Page: 300 / 364

Chapter 2 Q-SIG FEATURES
2-24
NWA-088654-001 Rev.1.0
94ch2001.fm
CALLED PARTY NUMBER ASSIGNMENT
CALLED PARTY NUMBER ASSIGNMENT
DESCRIPTION DATA
Assign the access code for LCR Group 0-3. •
(1)
(2)
Y=0-3 Numbering Plan Group 0-3
X-XXXX: Access Code
A126: LCR Group 0
A127: LCR Group 1
A128: LCR Group 2
A129: LCR Group 3
Assign an Area Code Development Pattern
number to each LCR Group. •
(1)
(2)
Y=A000
0-3: LCR Group 0-3
4005-4007: Area Code Development pat-
tern No. 5-7
Assign a Route Pattern number to the digits to
be dialed in the Area Code Development Pat-
tern number assigned by CM8A Y=A000. •
(1)
(2)
Y=4005-4007 Area Code Development
Pattern No. 5-7
X-X...X: Area Code 1-8 digits
0000-0255: Route Pattern No. 000-255
Specify the LCR selection priority for the
Route Pattern number assigned by CM8A
Y=4005-4007. •
(1)
(2)
Y=0000-0255
Route Pattern No. 000-255
1: 1st priority
2: 2nd priority
3: 3rd priority
4: 4th priority
XXX ZZ
XXX: 000-255: LCR Pattern No.
ZZ : 00-63: Trunk Route No.
For area code deletion, designate the digits to
be deleted, if required.
(To delete all digits of the area code.) •
(1)
(2)
Y=5000-5255
LCR Pattern No. 000-255
152: Deletion of all digits of the area code
assigned by CM8A Y=4005-4007
0: To delete
START
CM20
CM8A
A