NEC Univerge SV9100, Programming Manual

Page: 376 / 954

Issue 4.0
2-336 Program 21 : Outgoing Call Setup
Description
Use
Program 21-05 : Toll Restriction Class
to set the system Toll Restriction classes (1~15).
Program 21 : Outgoing Call Setup
21-05 : Toll Restriction Class
Level:
IN
Input Data
Toll Restriction Class Number 1~15
Item
No.
Item Input Data Default Description
Related
Program
01
International Call
Restriction Table
0 = Unassigned
(No)
1 = Assigned
(Yes)
1, 6~15 = 0
2~5 = 1
Assign/Unassign the
International Call Restrict Table
for the Toll Restriction Class you
are programming. Enter
International Call Restrict Table
data in Program 21-06-01.
21-06-01
02 International Call
Permit Code Table
0 = Unassigned
(No)
1 = Assigned
(Yes)
1, 3~15 = 0
2 = 1
Assign/Unassign the
International Call Permit Table
for the Toll Restriction Class you
are programming. Enter
International Call Permit Table
data in Program 21-06-02. 21-06-02
03
--- Not Used ---
04 Maximum Number of
Digits Table
Assignment
1~4 = Table
0 = Disable
(None)
1, 2, 6~15 = 0
3 = 1
4 = 2
5 = 3
Select the table (defined in
21-06-03) to be used to
determine the maximum number
of digits allowed for outgoing
calls. 21-06-03
05 Common Permit
Code Table
0 = Unassigned
(No)
1 = Assigned
(Yes)
1, 8~15 = 0
2~7 = 1
Choose whether the table set up
by 21-06-04 is referred to or not. 21-06-04
06 Common Restriction
Table
0 = Unassigned
(No)
1 = Assigned
(Yes)
1, 6~15 = 0
2~5 = 1
Choose whether the table set up
by 21-06-05 is referred to or not. 21-06-05