NEC Univerge SV9100, Features And Specifications

Page: 99 / 1402

99
Caller ID Call Return
Description
The Caller ID Call Return feature allows the voice mail system to use Caller ID information captured with
the message to call and connect the person that left the message with the voice mail user that is
checking messages.
Conditions
A caller using a telephone without Softkeys, calling from outside the system, or from a
remote system is prompted to hear Caller ID information and return a call.
Return Call is available for subscriber messages and public messages.
Return Call is accessible to a subscriber during and after message playback.
Return Call is available for new and old messages.
Return Call is accessible to a subscriber using Softkeys in Softkey mode or using DTMF in
voice conversation Mode.
On the UM8000 Mail, one minute before disconnecting the original caller, voice mail plays a
warning prompt and immediately before disconnecting plays a prompt to indicate dropping
the call.
When a subscriber listens to a message from a Softkey equipped telephone, and Caller ID
information is unavailable, the voice mail system leaves the second line of the LCD blank.
When Caller ID is disabled on the system, voice mail displays the message count.
On the UM8000 Mail, from the subscriber options Softkey menu, a subscriber can access a
Softkey menu that allows selection of name or number to be displayed on the LCD during
message playback. The default is name. Voice mail uses this setting to determine the initial
display on the LCD during playback.
Voice mail continues to display Caller ID on the LCD while the post-message playback
menu is still displayed on a telephone equipped with Softkeys.
On the UM8000 Mail, during return call, the voice mail port is in conference with the box
owner and messages.
When Centralized Voice Mail is used, the remote voice mail user gets only Caller ID
number when voice mail answers incoming CO calls and performs an Await-Answer
transfer to the remote user. A Call that forwards to voice mail from the remote system does
not have Caller ID information.
Live Record is not available when using Return Call.
A Telephone used as a Contact Centre Plus agent or supervisor station should not have
mailboxes that support Softkeys. Softkeys can be disabled per mailbox in Access Codes
Options by enabling Hands Free Play for a particular station.
On the UM8000 Mail, the Return Call feature is enabled per mailbox in Subscriber/Access
Options and can be enabled for internal numbers only or for both internal and external
numbers.