NEC Univerge SV9100, Features And Specifications

Page: 825 / 1402

825
Program
Number
Description System A Setting System B Setting
14-05-01 First setting data. Put CCISoIP trunks in trunk group 10. 10 10
14-05-01 Second setting data. Set priorities 1 ~ 8 for trunks 9 ~ 16. 1 ~ 8 1 ~ 8
26-01-01 Enable ARS services. 1 1
26-02-01 For table entry 1, enter 5 wildcard characters. @@@@@ N/A
26-02-02 For table entry 1, set service type to F-Route (2). 2 N/A
26-02-03 For table entry 1, set additional data to F-Route table 2. 2 N/A
26-03-01 Set ARS Treatment 1 to sent the number including the trunk access
code of 9 to System B. D019RE N/A
44-02-01 Closed numbering setup
– Set to first digit of remote system
extension number.
2 1
44-02-02 Closed numbering setup
– Set to F-Route table (2).
2 2
44-02-03 Closed numbering setup
– Set to use F-Route table 1 for intercom
calls.
1 1
44-05-01 Closed numbering setup
– Set table 1 first priority to use CCIS trunk
group 10.
10 10
44-05-09 Closed numbering setup
– Set table 1 first priority maximum digit
length to 3.
3 3
44-05-10 Closed numbering setup
– Set table 1 first priority to remote system
point code.
2 1
44-05-01 ARS Routing
– Set table 2 first priority to CCIS trunk group 10.
10 N/A
44-05-08 ARS Routing
– Set table 2 first priority to dial treatment 1.
1 N/A
44-05-09 ARS Routing
– Set table 2 first priority maximum dialing digit 11.
11 N/A
44-05-10 ARS Routing
– Set table 2 first priority to System B point code (2).
2 N/A
44-05-01 ARS Routing
– Set table 2 second priority to local trunk group 1.
1 N/A
44-05-09 ARS Routing
– Set table 2 second priority maximum dialing digit 10.
10 N/A