manualshive.com logo in svg

NEC UNIVERGE SV9100 DT750, User Manual, Page: 107 / 122

Share
Download
NEC UNIVERGE SV9100 DT750 User Manual Download Page 107

 99 

7.

Online Monitoring

In Online Monitoring, users can see the following 
information on the terminal LCD.

QoS information (RTP Packet Loss (per 5 sec.), 
Payload, CODEC)

System information

Ping

Conditions for activating Online 
Monitoring Menu

Press and hold 

Help

 key. Main screen of Online 

Monitoring will be displayed.

To exit from Online Monitoring, press 

Exit

 key.

When just pressing 

Help

 key, Help information will 

be displayed.

Key Operation Chart

QoS Information (RTP Packet Loss (per 5 
sec.), Payload, CODEC)

Press 

1

 in main screen, and move to QoS 

information menu.
The following information can be confirmed in QoS 
information:

3. Ping

Exit

2. System Information

1. QoS

Time/Feature Activity

Information Area of LCD

Press 

Help 

key for two seconds.

[1]

QoS

[1]

Lost Packet

[2]

Codec

[3]

Payload

[2]

System Information

[1]

Network Settings

[2]

SIP Settings

[3]

Audio&Visual Settings

[4]

Maintenance Settings

[5]

Terminal Information

[6]

LLDP Receive Information

[3]

Ping

Summary of Contents for UNIVERGE SV9100 DT750



























































































































Reviews:

No comments