2.
Install three screws into the wall. The screw heads must stand off from the wall about 2.5 mm
(0.098″) to 3.5 mm (0.138″).
353.25 mm
(13.907″)
266.5 mm
(10.492″)
195.9 mm
(7.713″)
210 mm (8.268″)
2.5 mm (0.098″) -
3.5 mm (0.138″)
Figure 2-10 Screw Positions
• The screw diameter is 4 mm (0.158″) to 4.5 mm (0.177″).
• Wall-Mounting Screws (M4.1x 25: 4 pcs) are attached to the Chassis.
The other screw is installed after slide the chassis into the position.
3.
Align the three holes on the back of the Chassis with the three screws installed in the wall.
Hook
Screw head
Screw head
Figure 2-11 Mounting the Chassis
ISSUE 1.0
SL2100
Hardware Manual
2-9
Summary of Contents for UNIVERGE SL2100
