NEC UNIVERGE SL2100, Hardware Manual

Page: 147 / 174

2.4 Loading the Customer Data
The backed up customer data can be loaded to the system by SD Card.
For the details of the CPU board installation, refer to Installing the CPU board (IP7[ ]-CPU-C1).
1. Turn the power off, insert the Customer Data SD card into the SD Slot on CPU board.
CPU board
SD card with
Customer data
SD slot (J12)
Figure 3-18 Inserting the SD card
2. Turn the power on, enter the Program Mode then PRG90-04.
Program Mode
9004-01
Data Load
Figure 3-19 PRG90-04 Display (12TXH/24TXH-A1)
Program Mode
Base Service OP1 OP2
90-04-01
Data Load YES:1 1
Figure 3-20 PRG90-04 Display (12TXH/24TXH-B1)
3. Dial 1 and press Hold key.
4. When the data loading is completed, the display changes to the next PRG.
9004-01
Loading Data 9005- M
,
tenanc
Slot Control
Figure 3-21 Next PRG Display (12TXH/24TXH-A1)
Loading System Data
90-05- M’tenance
Slot Control |01
back Select
Figure 3-22 Next PRG Display (12TXH/24TXH-B1)
5. Remove the SD card and exit from the Program Mode.
ISSUE 1.0 SL2100
Hardware Manual 3-7