NEC UNIVERGE SL2100, Hardware Manual

Page: 140 / 174

5.10 Installing the DT430/IP4WW-12/24TXH-[ ] Multiline Terminals and options
5.10.1 Connecting the DT430/IP4WW-12/24TXH-[ ] Multiline Terminals and options to
the SL2100 system
Refer to SV9100 System Hardware Manual for installing DT430 Multiline Terminals.
Refer to SL1000/SL1100 System Hardware Manual for installing the IP4WW-12/24TXH-[ ] Multiline
Terminals.
5.10.2 Special Notes
• The DT430/IP4WW-12/24TXH-[ ] Multiline Terminal can be connected according to the following
terminal power factor. Do not connect more than this value.
• The Illuminance sensor does not function when the IP4WW-12/24TXH-B Terminal connected to the
SL2100 system.
• Due to Illuminance sensor does not function, the Automatic brightness control of LCD backlit cannot
be controlled when the IP4WW-12/24TXH-B Terminal connected to the SL2100 system.
Table 2-40 Terminal Power Factor
Terminal Power Factor
1 Chassis = < 38
Item Power Factor
IP7WW-12/24TXH-[ ]1 TEL 1
IP7WW-60D DSS-[ ]1 1
Single Line Telephone 1
IP4WW-12/24TXH-[ ] TEL 1
DTZ-12D-3[ ] TEL 2
DTZ-24D-3[ ]TEL 2
DCZ-60-2[ ] ( ) Console 2
BCA-Z[ ] 1
Table 2-41 Maximum Number of Terminal installed
Terminal (Power Factor)
Maximum Number of Terminal installed
Remarks
1 Chassis 2 Chassis 3 Chassis
IP7WW-12/24TXH-[ ]1 (1) 24 48 72
IP7WW-60D DSS-A1 (1) 3 6 9
IP7WW-60D DSS-B1 (1) 12
Single Line Telephone (1) 32 64 96
IP4WW-12/24TXH-[ ]TEL (1) 24 48 72
DTZ-12D-3[ ] TEL (2) 19 38 57
DTZ-24D-3[ ] TEL (2) 19 38 57
DCZ-60-2[ ] ( ) Console (2) 1 2 3
DTZ Te BCA-Z[ ] (3) 12 24 36
SL2100 ISSUE 1.0
2-94 Installation