NEC UNIVERGE SL2100 Features And Specifications Manual Download Page 893 | Manualshive

Page: 893 / 978

background image

Virtual Extensions

Description

Virtual Extensions are available software extensions in the SL2100. A Virtual Extension assigned to a
line key, can appear and ring on an individual station or multiple stations and be used for outbound
access.

Up to 50 VE keys are provided.

Conditions

• More than 17 IP Multiline Terminals are not recommended when the same Virtual Extension Keys

are assigned to each IP Multiline Terminal.

• The 50 available ports/Extensions are assigned on a per extension basis for Virtual Extension key

mode.

• The 50 available ports/Extensions are assigned per extension for CAR key mode or Virtual

Extension key mode.

• More than one extension can share a Virtual Extension key.
• An extension can have more than one Virtual Extension key assigned.

Assigning a Virtual Extension key of the extension the key is assigned on is not supported.

• Up to 32 incoming calls can be queued to busy Virtual Extension key.
• You cannot have a CAR key and Virtual Extension on the same telephone.
• Virtual Extensions do not support the following features:

- Barge-In
- Conference
- Conference, Voice Call/Privacy Release
- Reverse Voice Over
- Tone Override
- Voice Over

• When a valid system station calls a Virtual Extension appearing on another station, Voice and MW

softkeys appear in the display of the calling station, but they do not operate.

• When talking on a Virtual Extension you can mute the handset.
• Incoming calls to a virtual extension that appear on stations that are used with the CTI applications,

PC Assistant, or PC Attendant, do not show up as a second call in the CTI application.

• If multiple CAR/SIE/VE keys are ringing on a station at the same time, the CAR/SIE/VE key on the

lowest Line Key is answered first.

• Virtual Extension Keys assigned as code

*

03 do not support Voice Mail Message Indication on Line

Keys.

• Busy Virtual Extensions cannot be Tone overridden.
• Class of service feature PRG 20-11-20: No Call Back (transfer recall disable) is not supported for

calls from a physical extension to a virtual extension.

• When a call is parked from a virtual extension, the virtual extension is released.
• When parking a call from a virtual extension, PRG 15-02-21 and PRG 15-18-01 must be set to 1.
• Park Group assignment is by terminal extension, not the virtual extension.
• When a call parked from a virtual extension recalls, it will ring the terminal where the virtual

extension is programmed to, not the virtual extension key.

ISSUE 1.0

SL2100

Features and Specifications Manual

1-879

V

«
...
891
892
893
894
895
...
»

Summary of Contents for UNIVERGE SL2100



















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for UNIVERGE SL2100

Brand: Samsung Pages: 2

Brand: Magnavox Pages: 24

Brand: Magnavox Pages: 22

Brand: Magnavox Pages: 21

Magnavox FW 750C

Brand: Magnavox Pages: 28

Magnavox FW 2012

Brand: Magnavox Pages: 16

Brand: Audio System Pages: 2

Brand: Avaya Pages: 137

RealPresence Group 700 system

Brand: Polycom Pages: 2

Brand: Teac Pages: 16

Brand: Hioki Pages: 52

Brand: LAIA Pages: 9

Brand: RCA Pages: 35

ARMT.665230.202-01

Brand: ARMTEL Pages: 36

Brand: Boss Audio Systems Pages: 4

Brand: Sharp Pages: 33

Brand: Velux Pages: 72

Brand: Siemens Pages: 49

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands