NEC UNIVERGE SL2100, Features And Specifications Manual

Page: 816 / 978

Continued
from
previous
page
Set PRG 14-01-06 to “1” for each
trunk which should provide SMDR.
Set PRG 15-01-03 to “1” for each
extension which should provide SMDR.
In PRG 35-02-08,
enter 0.
No
No
No
No
Should the SMDR report
include incoming calls?
In PRG 35-02-08,
enter 1.
In PRG 35-02-19,
enter 0.
First 20
digits
Yes
Yes
Yes
Yes
Last 20
digits
Should the dialed number
display the first 20 digits or
last 20 digits of the number?
Should the SMDR report
include extension names
or numbers?
In PRG 35-02-19,
enter 1.
In PRG 35-02-09,
enter 0.
In PRG 35-02-10,
enter 0.
Should the SMDR report include
information when all lines in a group are
busy and a user tries to access the group?
Should the DID table name
be displayed for incoming
DID calls?
Should the SMDR report display
the Caller ID when an incoming
DID number is transferred to an
outgoing trunk?
Continued on
next page
Extension
name
Extension
number
In PRG 35-02-12,
enter 0.
In PRG 35-02-13,
enter 0.
In PRG 35-02-09,
enter 1.
In PRG 35-02-10,
enter 1.
In PRG 35-02-12,
enter 1.
In PRG 35-02-13,
enter 1.
Figure 1-43 SMDR Flowchart (Continued)
SL2100 ISSUE 1.0
1-802 Station Message Detail Recording
S