background image

 

50 

• TIME FORMAT

 

Factory Default: 12hour

 

You can select a time format (12hours, 12hours 
(AM0:00) and 24hours) as required. 

-

 

Press the          key while in Standby mode. 
Your phone displays the main menu. 

-

 

Press the        key to select “5.Setting” and 
then press the     key. 

-

 

Press the        key to select “1.User Setting” 
and then press the     key. 

-

 

Press the        key to select “7.Date & Time” 
and then press the     key. 

-

 

Press the        key to select “3.Time Format” 
and then press the     key. 

-

 

Press the      key to select “1.12hours”, 
“2.12hours(AM0:00)” or “3.24hours” and 
then press the “OK” soft key. 

 
 
 
 
 
 
 
 
 
 

You can reach the Time Format 
menu by pressing the following 
keys. 
 
To go to the Time Format menu: 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

• DAYLIGHT SAVING

 

Factory Default: Disable

 

You can use daylight saving as required. 

-

 

Press the     key while in Standby mode. 
Your phone displays the main menu. 

-

 

Press the        key to select “5.Setting” and 
then press the     key. 

-

 

Press the        key to select “1.User Setting” 
and then press the     key. 

-

 

Press the        key to select “7.Date & Time” 
and then press the     key. 

-

 

Press the    key to select “4.Daylight 
Saving” and then press the          key. 

-

 

Press the   key to select “1.Disable” or 
“2.Enable” and then press the “OK” soft 
key. 

 
 
 
 
 
 
 
 
 
 

You should not set daylight saving 
to enable when your phone 
displays I-SIP icon.
 

 

You can reach the Daylight Saving 
menu by pressing the following 
keys. 
 
To go to the Daylight Saving 
menu: 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 

TIP 

Time Format 

            OK       Back 

1.12hours 
2.12hours(AM0:00)

 

3.24hours

 

TIP 

Daylight Sav 

            OK       Back 

1.Disable 

2.Enable

 

TIP 

Summary of Contents for UNIVERGE MH240









































































































Reviews: