4
5
4. Using the Viewer
❷
Projecting images stored in a USB memory device
This
section
explains
the
basic
operation
of
the
Viewer.
The
explanation
provides
the
operational
procedure
when
the
Viewer
toolbar
(
→
page
)
is
set
to
the
factory
de
-
fault.
-
Starting
the
Viewer ......................................................................below
-
Removing
the
USB
memory
from
the
projector ...................... page
-
Exiting
the
Viewer .................................................................... page
Preparation:
Before
starting
the
Viewer,
store
images
to
the
USB
memory
using
your
computer.
Starting the Viewer
1. Turn on the projector. (
→
page
2. Insert the USB memory into the USB port of the projec-
tor.
• Do not remove the USB memory from the projector while
it’s LED flashes. Doing so may corrupt the data.
3. Press the SOURCE button on the projector cabinet.
The Viewer start screen will be displayed.
• Press the
USB-A
button on the remote control.
