14
2. Projecting an Image (Basic Operation)
❹
Selecting a Source
Selecting the computer or video source
NOTE: Turn on the computer or video source equipment connected to the projector.
Detecting the Signal Automatically
Press
the
SOURCE
button
once.
The
projector
will
search
for
the
avail-
able
input
source
and
display
it.
The
input
source
will
change
as
follows:
HDMI1
→
HDMI2
→
COMPUTER
→
VIDEO
→
USB-A
→
LAN
• With
the
SOURCE
screen
displayed,
you
can
press
the
SOURCE
button a few times to select the input source.
TIP: If no input signal is present, the input will be skipped.
Using the Remote Control
Press
any one of the COMPUTER1, HDMI1, HDMI2, VIDEO or USB-A
buttons.
Selecting Default Source
You
can
so
that
it
will
be
displayed
each
time
the
projector
is
turned
on.
1. Press the MENU button.
The menu will be displayed.
2. Press the
▶
button twice to select [SETUP] and the
▼
button or
the ENTER button to select [GENERAL].
3. Press the
▶
button four times to select [OPTIONS(2)].
4. Press the
▼
button five times to select [DEFAULT SOURCE SE
-
LECT] and press the ENTER button.
The [DEFAULT SOURCE SELECT] screen will be displayed.
(
→
page
5. Select a source as the default source, and press the ENTER button.
6. Press the EXIT button a few times to close the menu.
7.
Restart the projector.
The source you selected in step 5 will be projected.
TIP:
• When the projector is in Standby mode, applying a computer signal from a computer
connected to the COMPUTER IN input will power on the projector and simultaneously
project the computer’s image.
([AUTO POWER ON]
→
• On Windows 7, a combination of the Windows and P keys allows you to set up external
display easily and quickly.
