-57-
4.5
Configuring the Library
This section describes Library configuration,setting of the drive, changing of the password , and
setting for I/O station.
4.5.1
Viewing Configuration data of the library
Take the following steps to view the configuration data of the library.
1)
[Login]. See Section 4.3Login for detail.
2)
Select [Current Information].
3)
Select [Setting Information] from [Current Information].
The configuration information of the library is displayed.
To view the firmware version of the library, select [View Revision] from [service] of [Top menu].
4.5.2
Change password
The following describes how to change the password used during login.
1)
[Login]. See Section 4.3Login for detail.
2)
Select [Configuration].
3)
Select [OP Panel Settings] from [Configuration].
4)
Select [Change Password] from [Configuration].
5)
The following password input menu will appear.
Enter a new four-digit password.
6)
Next, retype the password that you entered at step 5).
7)
If the password entered in step 5) and 6) match, the following message will appear.
