-144-
6.3.3
Disabling the Encryption Management Function for the Library
You need to disable encryption for the Library when, for example, performing encryption using
backup software. Select “Disable” for “Encryption” in [Encryption Basis], and then click “Submit”.
Figure 6-14 Disabling the Encryption Management Function
When Encryption management function is disabled, the setting of an individual tape
medium becomes invalid, too. Again, please note that all the tape medium return to
initialization when you make the Encryption management function enable.
Please note that an old encryption key is understood from exporting the encryption key
to each tape medium because information individually set is deleted.
After rebooting the device automatically, the encryption management function becomes disabled.
