NEC SV8500, Operation And Maintenance Manual

Page: 718 / 975

– 671 –
CHAPTER 5 Operation Procedure for System with PIR
5.6 How to Turn ON/OFF Whole System
This section explains the order to turn ON/OFF the power of the whole system when PIR
is mounted.
Be sure to follow the procedures below to power on/off the system.
5.6.1 Power ON/OFF Procedure for Telephony Server
[System Power ON]
• 1-IMG configuration
PWR/DPWR card on PIR o Power module on SV8500 server
• 4-IMG configuration
PWR card on TSWR o PWR/DPWR card on PIR o Power module on SV8500 server
Note: To turn on the PIR modules, power on the younger number of PIR module first and then turn on the older
numbers in order (PIR0
o PIR1 o PIR2.....).
[System Power OFF]
• 1-IMG configuration
Power module on SV8500 server o PWR/DPWR card on PIR
• 4-IMG configuration
Power module on SV8500 server o PWR card on TSWR o PWR/DPWR card on PIR
Note:
To turn off the PIR modules, power off the younger number of PIR module first and then turn off the older
numbers in order (PIR0
o PIR1 o PIR2.....).
ATTENTION
Contents
Static Sensitive
Handling
Precautions Required