NEC SV8500, Manual

Page: 918 / 3438

VOL.2-665
MG-COT Card [SCA-6COTB]
<When SIP Mode>
Assign the configuration data for MG-COT Card in SIP mode. About the configuration data for Proprietary Pro-
tocol mode, refer to
page 661 .
STEP 1: When the boot program is started, the initial display below is displayed on the screen.
The system requires a one-time password for authentication in initial startup. Enter the same password
with the one assigned on the Telephony Server. As long as you do not enter the one-time password,
you cannot move on to the next step.
STEP 2: Type “usrConsole” at the indicated OS prompt and press the ENTER key.
STEP 3: MG-COT Card command prompt “MG-COT>” appears as follows.
MG-ID : xxxxxxxxxxxx
Boot program version : SP3839 SH7751R CBOOT-1 PROG-A
[04.00.00.00]
Main program version : SP3948 6MGCOT PROG-A [01.00.00.00]
H/W PKG information : CA-CC07 001
H/W PKG information : CA-CC08 001
DSP information : DSP-K-AC48302ck [03.11.00.00]
DSP information : DSP-P-AC48302ce6 [03.11.00.00]
Starting Boot program.....
--- Online program Initial start (Wait for a while.) ---
:
: (Omitted)
:
No One Time Password!!
Please input a one time password.
One Time Password: 12345#
One Time Password setting succeeded.
->
->
->usrConsole