NEC SV8500, Manual

Page: 3297 / 3438

VOL.3-810
CHAPTER 4 CONFIGURATION SETUP
Note 1:
Do not go the handset off-hook when headset is used.
Note 2:
The priority order of Ringing Tone settings is as follows.
• 1st Priority: Ringing tone settings by “2. Directory (Earlier than FW 2.0.0.0)” - “2.Edit” -
8.Ringing Tone/9. Illumination
• 2nd Priority: Ringing tone settings by “2. Directory (Earlier than FW 2.0.0.0)” - “3.Group Setting”
- 2.Ringing Tone/3. Illumination
• 3rd Priority: Ringing tone settings by “5. Setting (Earlier than FW 2.0.0.0)” - “1.User Setting” -
4.Ringing Tone/5. Illumination
Note 3:
In the case of power failure for backlight, the terminal follows the Telephony Server’s direction discarding
the terminal’s setting.
Note 4:
To make the font size change effective, once exit the configuration menu by pressing the software key for
“Exit.”
6. Presence
(Earlier than FW 2.0.0.0)
Not used.
#. Favorite
(Earlier than FW 2.0.0.0)
Not used.
3. Data Backup/Restore
Makes backup of terminal data or restores from
backup file.
-
X X
1. Data Backup Saves the terminal setting to backup file.
PersonalDat
a.gz
2. Data Restore
Restores the terminal data by reading out the
saved backup file.
PersonalDat
a.gz
X X
3. Server Address Sets IP address of FTP/TFTP server. 0.0.0.0 X X
4. Protocol Specifies the protocol for file downloading.
FTP X X 1. FTP FTP is used.
2. TFTP TFTP is used.
5. FTP Settings Sets data for accessing FTP server.
- X X
1. User ID Sets user ID for login to FTP server.
2. Password Sets password for login to FTP server.
3. Folder Specifies the directory to save backup file.
0. Config
(Earlier than FW 2.0.0.0)
Parameter Description Default
DT750
Series DT730
Series DT710
Series
1. Network Settings Sets network related data. - X X X
5. Setting
(Continued) (Earlier than FW 2.0.0.0)
Parameter Description Default
DT750
Series DT730
Series