NEC SV8500, Manual

Page: 3020 / 3438

VOL.3-533
CHAPTER 4 CONFIGURATION SETUP
4.1.2 IP Address
On the IP Address parameter, set IP address of the terminal.
STEP 1: Select “2. IP Address” by pressing “2” key on the Network Settings Menu.
Network Settings Menu
STEP 2: Enter IP address of DtermIP (SIP). For example, to set the IP address of 10.41.208.205, enter
10*41*208*205 [separate with an asterisk (*)].
Note:
To delete an entered character, press BK key.
STEP 3: After entering IP address, press OK key and go back to the Network Settings Menu.
STEP 4: Press Exit key on the Network Settings Menu to return to the Main Menu.
STEP 5: Press Save key on the Main Menu to save the assigned data.
Up Down Exit
11.DHCP Mode
2.IP Address
3.Default Gateway
4.Subnetmask
5.DNS Address
6.Advanced Settings
Cancel OK
Use
′
*
′
For .
Self IP? XXX.XXX.XXX.XXX
BK