NEC SV8500, Manual

Page: 2316 / 3438

VOL.2-2063
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
F
To directly enter the setting value:
• When P1=TOS is entered:
• When P1=DIFFSERV is entered:
• When P1=CLEAR is entered to delete the current QoS setting:
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Note:
The value in ( ) shows the current setting.
13. Setting IP address, port number, and host name of SIP server:
This command is used for SIP mode only.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
VS-32(SIP)> SET SIGNALING_QOS TOS 0xC0
P1 : Enter TOS to set IP Precedence data value
P2 : Enter the setting value [0x02~0xFF]
Signaling QoS setting succeeded.(0xC0)
Result is shown.
VS-32(SIP)> SET SIGNALING_QOS DIFFSERV 48 P1 : Enter DIFFSERV to set Diffserv data value
P2 : Enter the DSCP setting value [0~63]
Signaling QoS setting succeeded.(0xC0) Result is shown.
VS-32(SIP)> SET SIGNALING_QOS CLEAR
P1 : Enter CLEAR to clear QoS setting
Signaling QoS clearing succeeded.(0x00)
Result is shown.
VS-32(SIP)> SET SIPSV_IPADDRESS
SIP Server (1-20): 1
Enter the SIP server’s number [1-20]
Up to 20 SIP servers can be used in one network.
IP Address: 10.41.1.150
Enter the IP address of SIP server. Note 1
e.g. 10.41.1.150 (default=0.0.0.0)
Port Number: 5060
Enter the port number [1024-65535] (default=5060)
Is there the Host Name? (Y/N) [N]: y
Select whether to use host name [Y/N]
Host Name: SVR1.nec.com
Enter the host name in the full-domain format, within 63-
byte of alphanumerics, “. (period)”, and “- (hyphen)”.
63. (*This line is displayed when “Y” is selected above.)
SIP server setting succeeded.
Result is shown.