VOL.2-2056
VS-32(Dual) [SCA-VS32VA/MG-VS32VA]
SET
This command is used to assign individual detailed settings.
1.
Setting Default Gateway:
Assign the IP address of Default Gateway in the same segment where VS-32(Dual) belongs. This data can
be set also in
SETUP TP
and
SETUP SP
command.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
2.
Setting DHCP:
Assign ENABLE when the network uses DHCP server to get IP address. Assign DISABLE when the net-
work applies static addressing. This data can be set also in
SETUP TP
and
SETUP SP
command.
Note:
To make this assignment effective, use the SAVE command, and restart before exiting the maintenance com-
mand.
Errors for WAVE file format
ILLEGAL FORMAT
NORMAL VALUE
COUNTERMEASERS
Codec
0x0006 (A-law)
0x0007 (
μ
-law)
Create wave file with
μ
-law or A-law of PCM codec.
Channel
1 (monaural)
Create wave file with monaural channel.
Rate
8000 (8kHz)
Create wave file with 8kHz of sampling period.
Byte Per Sec
8000
Create wave file with 8kHz and 8-bit of sampling.
Byte Per Block
1
Create wave file specifying 8-bit and monaural channel as quantization sam-
ple bit number.
Bit Per Sample
8
Create wave file specifying 8-bit as quantization sample bit number.
VS-32>
SET DEFAULTROUTE
P1
P1
: Enter the IP address of Default Gateway
(e.g. 10.41.1.254)
The default Gateway setting succeeded.
Result is shown.
VS-32>
SET DHCP P1
P1
: Enter ENABLE or DISABLE
ENABLE=DHCP is valid (default)
DISABLE=DHCP is invalid
DHCP setting succeeded.
Result is shown.
Summary of Contents for SV8500
