NEC SV8500, Manual

Page: 2064 / 3438

VOL.2-1811
MG-SIP16 [SCA-16SIPMGA/MG-16SIPMGA]
When Out-Band is selected:
When In-Band is selected:
Note:
Note that the sum of DTMF Duration and DTMF Pause values must be specified more than 120ms. If not,
the following error message is displayed.
18 SET Δ H245_BASE_PORT_NO
This command is used to specify the H.245 port number to/from the Telephony Server network.
19 SET Δ HC_ALARM
This command is used to set the alarm function which is activated to send a warning tone when a health
check timeout occurs.
MG(SIP) > set dtmf_mode
DTMF Mode (0=Negotiation,1=Out-Band,2=In-Band)(default=0): 1
DTMF Duration (50-240(default=120)):
DTMF Pause(30-240(default=100)):
Payload type(RFC2833)(96-127(default=101)):
• When Out-Band (=1) is selected:
• Specify DTMF Duration.
• Specify DTMF Pause.
• Specify Payload type.
MG(SIP) > set dtmf_mode
DTMF Mode (0=Negotiation,1=Out-Band,2=In-Band)(default=0): 2
DTMF Duration (50-240(default=120)):
DTMF Pause(30-240(default=100)):
• When In-Band (=2) is selected:
• Specify DTMF Duration.
• Specify DTMF Pause.
Input parameter error.
reason [DTMF Du DTMF Pause < Min120ms]
MG(SIP) > set h245_base_port_no
H245 base port number(1024-65535): 40000
• Assign the negotiation port number (default: 40000).
MG(SIP) > set hs_alarm
Please select H/C alarm type? (default=0)
0: IPX and SIP side enable
1: IPX side enable
2: SIP side enable
3: disable
• Select a type of Health Check Alarm.
0: Warning tone is sent to the Telephony Server and SIP sides
(default).
1: Warning tone is sent to the Telephony Server side only.
2: Warning tone is sent to SIP side only.
3: disable