NEC SV8500, Manual

Page: 2026 / 3438

VOL.2-1773
MG-SIP16
20.5.3 Error Messages on Maintenance Console
The following are error messages displayed on the Maintenance Console.
*Refer to each command for the other error messages.
ERROR MESSAGE
TROUBLESHOTTING
Illegal command.
An incorrect command is entered. Enter the command correctly.
Illegal parameters
An incorrect parameter is entered. Enter the parameter correctly.
Invalid parameters
An invalid parameter is entered. Enter the parameter correctly.
Please set up IPX side IP address
Assign Telephony Server side IP address by set ipaddress command.
Please set up SIP side IP address
Assign SIP side IP address by set ipaddress command.
Please set up DRS IP address
Assign DRS IP address by set drsaddress command.
Please set up SIP server IP address/
FQDN
Specify SIP server by set sip_server command.
Please set up keynumber
Assign a pilot number by set keynumber command.
User program download error 1
Internal error
User program download error 2
Download file cannot be found.
User program download error 3
Network connection cannot be established
User program download error 4
TFTP errors other than User program download errors 1 to 3
User program download error 5
Flash write error (User Program)
User program download error 6
Flash write error (Music/Tone)
Input parameter total error [DTMF
Du DTMF Pause < Min 120ms]
Assign 120ms or more to the total of DTMF Duration and DTMF Pause.
Registration NG. Waiting Re-Registra-
tion timer.
Registration error. Re-Registration is being performed.
Register Server Configuration data is
not setting.
There is no Register Configuration Data. Assign the data by set
sip_register command.