NEC SV8500, Manual

Page: 1911 / 3438

VOL.2-1658
MG-SIP96
Note:
The conditions of this command are as follows.
• Assign this command adjusting to the specifications on the SIP network where MG-SIP96 connects.
• Normally this command is not required to be changed.
(42) rtp_qos
This command is used to specify the ToS value of Real-Time Protocol (RTP) packets on SIP network
side.
[Setting Example]
* See “ drs_qos ” command for a display example and the contents of the configuration.
Note: Normally this command is not required to be changed.
(43) sdp_style
This command is used to receive SDP with multiple “m” lines.
• When normal style is specified:
• When RFC4566 style is specified:
Note:
The conditions of this command are as follows.
• This command is available for SP-3987 MGSIP PROG-B Issue 2 or later.
• The setting of G729 annexb=no is available for SP-3987 MGSIP PROG-B Issue 3 or later.
(44) self_sip_domain
Setting of SIP domain name for MG-SIP96
MG(SIP)> set rtp_qos
MG(SIP) > set sdp_style
Select SDP style setting.
0=normal(default)
1=RFC4566
Input:0
0: normal (default)
1: conforms to RFC4566
MG(SIP) > set sdp_style
Select SDP style setting.
0=normal(default)
1=RFC4566
Input:1
0: normal (default)
1: conforms to RFC4566
Select the setting of G729 annexb=no.
0=disable (default)
1=enable
Input:1
Specify the setting of G729 annexb=no.
0: G729 annexb=no is disabled.
1: G729 annexb=no is enabled.