NEC SV8500, Manual

Page: 1773 / 3438

VOL.2-1520
MG-SIP128 [MG-128SIPMGJ]
[Setting Example]
• When this command is enabled:
• disable
Note: The conditions of this command are as follows.
• Assign this command adjusting to the specifications on the SIP network where MG-SIP128 [MG-
128SIPMGJ] connects.
• This command is required only when SIP domain must be separated between the SIP server and MG-SIP128
[MG-128SIPMGJ].
• If this command is not set, the SIP domain set by “set sip_server” command is used for the SIP domain of
MG-SIP128 [MG-128SIPMGJ].
(44) session_timer
Setting of session timer
This command is used to specify the Session Timer.
[Setting Example]
When Session-Timer is Enable (=0) is selected:
MG(SIP) > set self_sip_domain
Select Self SIP Domain mode.
0=disable(default)
1=enable
Input:1
0: without domain name (Default)
1: with domain name
Input a Self SIP Domain
string.(MAX128(strings))
:
Input the SIP domain name in maximum of
128 characters.
MG(SIP) > set self_sip_domain
Select Self SIP Domain mode.
0=disable(default)
1=enable
Input:0
0: without domain name (Default)
1: with domain name
MG(SIP) > set session_timer
Select the setting of Session-timer.
0=enable(default)
1=disable
0: Session Timer is enabled (Default)
1: Session Timer is disabled
MG(SIP) > set session_timer