NEC SV8300, Command Manual

Page: 719 / 804

3-663
NWA-033623-001 Rev.8.1
91ch3008.fm
COMMAND CODE TITLE:
FAULT INFORMATION STORE/DISPLAY FUNCTIONS
EA
FUNCTION:
This command is used for fault maintenance of the PBX. The functions of this command are outlined
below:
• Storing fault information into the Fault Store Memory upon occurrence of a fault.
• Display of the stored fault information
• Control of the external alarm upon occurrence of a fault
PRECAUTION:
(1) In CMEA Y=0, the fault information is automatically displayed when is pressed after entering
first data 00.
(2) See Fault Information Display in the following pages for details on how to read the fault
information.
(3) When entering data with characters, the following characters can be registered;
Alphabet upper case (A-Z), alphabet lower case (a-z), numeric (0-9), symbol (! “ # $ % & ’ ( ) + ,
; < = > ? @ [ ] ^ _ ‘ { } ~), Space, hyphen (-), period (.), slash (/), colon (:)
NOTE: The character “CCC” cannot be registered.
ASSIGNMENT PROCEDURE:
DATA TABLE:
DE
ST + EAY + + DE
1ST DATA
(1-3 digits) +
2ND DATA
DE
(1-8 digits)
+ EXE +
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
0 Fault information
display
(Display only)
Page 3-677
0
9
F
The newest fault information
(0-9) stored in Fault Information
Memory
NOTE 1
Fault information all clear
NOTE 4
– –
Continued on next page
~
NOVEMBER/12/2008
CMEA