NEC SL1100, Pc Programming Manual

Page: 49 / 256

NEC SL1100 Issue 3.01
PC Programming Manual 4 - 5
___________________________________________________________________________________
___________________________________________________________________________________
Time&Date
1. Define the Date and Time by clicking the time settings button. You must
be connected to the system for this button to be active.
2. Define the Time Zone for the CPU.
3. Select if the system will follow Daylight Savings time.
4. If they system is to get it’s time using Network Time Protocol, enable it
and define the IP address of the NTP Server.
Figure 4-4 Time and Date