manualshive.com logo in svg

NEC SL1100, Feature Manual

Share
Download
NEC SL1100 Feature Manual Download Page 53

Automated Attendant Transfer

Description

An extension user can transfer a trunk call to the Automated Attendant to enable an outside caller to
use the Automated Attendant dialing options.

Extensions cannot call or be transferred to the InMail Automated Attendant.

Related Features

Automated Attendant on page 2-31

The Automated Attendant can automatically answer the phone system incoming calls, play an
Instruction Menu message, and provide dialing options to callers.

Programming

No additional programming required.

Operation

Automated Attendant Transfer

To transfer an outside call to the Automated Attendant:
1.

While on an outside call, press 

Hold

 key.

2.

Dial the voice mail master number (e.g., 200).

3.

Hang up.

ISSUE 3.5

SL1100

InMail Feature Manual

2-35

A

Summary of Contents for SL1100

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands