manualshive.com logo in svg

NEC SL1100, Feature Manual

Share
Download
NEC SL1100 Feature Manual Download Page 26

ACD Delay Announcement

(This feature is for V1.5 or higher)

Description

The InMail can now support Automatic Call Distribution Delay Announcements. Use 

Program 41-19 :

ACD Voice Mail Delay Announcement

 to assign In-Mail Call Routing Mailboxes as ACD Delay

Announcement Mailboxes.

Conditions

• Main Software Version 

V1.5 or higher

 is required for the InMail to support ACD Delay

Announcement.

• The KSU must be licensed for ACD and In-Mail for this feature to work.
• Call Routing Mailboxes used for Delay Announcements cannot be used for other voice mail

features.

• Call Routing boxes used for dialing options cannot be used for other voice mail features.
• When Voice Mail Delay Announcements are being played, InMail talk paths (ports) are used.
• InMail cannot be used for ACD Night Announcement.
• If a caller chooses to dial out of a queue during the delay announcement the caller is immediately

removed from the queue.

Default Settings

None

System Availability

Terminals

Not applicable

Required Component(s)

License for InMail

Related Features

Automatic Call Distribution

SL1100

ISSUE 3.5

2-8

ACD Delay Announcement

A

Summary of Contents for SL1100

































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands