NEC SL1000, Programming Manual, Page: 75 / 580

Program
11
Program 11 : System Numbering
11-10 : Service Code Setup (for System Administrator)
Level
IN
Description
Use Program 11-10 : Service Code Setup (for System Administrator) to customize the Service
Codes for the System Administrator. You can customize additional Service Codes in Programs
11-11~11-16. The following chart shows:
• The number of each code (01~49).
• The function of the Service Code.
• The type of telephones that can use the Service Code.
• The default entry. For example, dialing item 26 allows users to force a trunk line to disconnect.
Input Data
Item No. Item Terminals Default Related Program
01 Night Mode Switching MLT, SLT 818 12-xx
20-07-01
02 Change of music on hold tone MLT 881 10-04
03 Setting the System Time MLT 828
04 Storing Common Speed Dialing
Numbers MLT 853
05 Storing Group Speed Dialing
Numbers MLT 854
06 Setting the Automatic Transfer for
Each Trunk Line MLT 833 24-04-01
07 Canceling the Automatic Transfer
for Each Trunk Line MLT 834 24-04-01
08 Setting the Destination for Auto-
matic Trunk Transfer MLT 835 24-04-01
09 Charging Cost Display by the
Supervisor MLT 771
11 Entry Credit for Toll Restriction MLT 774
12 Night Mode Switching for Other
Group MLT 718 12-xx
20-07-01
16 Leaving Message Waiting (Re-
quires CPU to be licensed for
Hotel/Motel) MLT 726 11-11-09
17 Dial Block by Supervisor MLT 701 90-19
18 Off-Premise Call Forward by Door
Box MLT 822 13-05
20 VRS - Record/Erase Message MLT, SLT 716 20-07-13
21 VRS - General Message Playback MLT, SLT 711 20-07-14
22 VRS - Record or Erase General
Message MLT, SLT 712 20-07-15
23 SMDR - Extension Accumulated
Printout Code MLT 721 20-07-18
24 SMDR - Group Accumulated Print-
out Code MLT 722 20-07-19
25 Account Code Accumulated Print-
out Code MLT 723 20-07-20
Issue 0.1 SL1000
Programming Manual
2-55