NEC SL1000, Features And Specifications Manual

Page: 227 / 588

Flexible Timeouts
Description
The Flexible Timeouts feature provides a variety of timers in the Resident System Program to allow the
system to operate without initial programming. The system timers can be changed to meet customer
needs according to the system application requirements.
A Timer Class is used to allow terminals and trunks to have different timers for the same feature. There
are 16 timer Classes (0~15). The following table shows the Programs that are used depending on the
Timer Class used:
Timer Class
0
Timer Class
1~15
Title Comment
20-01-08 20-31-01 Trunk Queuing Callback Time Trunk Queuing callback rings an extension for this
time. Station Timer Class is referred by the station
that sets trunk queuing.
20-01-09 20-31-02 Callback / Trunk Queuing Cancel
Time The system cancels an extension Callback or
Trunk Queuing request after this time. Station
Timer Class is referred by the station that sets an
extension Callback or Trunk Queuing.
20-04-03 20-31-03 Virtual Extension Delay Interval If VE is set for Delayed Ringing (Program 15-11-
01), ring the covering extension after this time.
Station Timer Class is referred by the station
assigned to CAR/VE.
21-01-02 20-31-04 Intercom Interdigits Time When placing Intercom calls, users must dial each
digit in this time. Station Timer Class is referred by
stations. Trunk Timer Class is referred by DID/
Automatic Answer Trunk trunks.
21-01-03 20-31-05 Trunk Interdigits Time When placing CO calls, users must dial each digit
in this time. Station Timer Class is referred by
stations. Trunk Timer Class is referred by DID/
Automatic Answer Trunk trunks.
21-01-09 20-31-06 Hotline Time Start Time A Ringdown extension automatically calls its
programmed destination after this time. Station
Timer Class is referred by the stations which sets
Hotline.
22-01-03 20-31-07 Ring No Answer Alarm Time If a trunk rings a key telephone longer than this
time, the system changes the ring cadence. This
indicates to the user that the call was ringing too
long. Trunk Timer Class is referred by the trunk.
22-01-04 20-31-08 DIL No Answer Recall Time A DIL that rings its programmed destination longer
than this time diverts to the DIL No Answer Ring
Group (Program 22-08-01). Trunk Timer Class is
referred by the trunk.
22-01-06 20-31-09 DID Ring-No-Answer Time In systems with DID Ring No Answer Intercept, this
time sets the Ring No Answer time. This time is
how long a DID call rings the destination extension
before rerouting to the intercept ring group. Trunk
Timer Class is referred by DID trunk.
24-01-01 20-31-10 Hold Recall Time (Non Exclusive
Hold) A call on Hold recalls the extension that placed it
on Hold after this time. Station Timer Class is
referred by held call.
24-01-02 20-31-11 Hold Recall Callback Time (Non
Exclusive Hold) A Hold recall rings an extension for this time.
Station Timer Class is referred by held call.
24-01-03 20-31-12 Exclusive Hold Recall Time A call on Hold recalls the extension that placed it
on Hold after this time. Station Timer Class is
referred by held call.
ISSUE 1.0 SL1000
F
Features and Specifications Manual 1-219