NEC SIGMABLADE N8406-017, Manual

Page: 65 / 95

56
Installation
Checking components
See the list on page 54 to ensure that you have all the accessories.
Installation of the card in a Blade Enclosure
Important
●SIGMABLADE-H is the Blade Enclosure in which this card can be installed.
● Note that a switch module slot in which a switch module or pass-through card can be installed
depends on the type of the switch module/pass-through card and how other switch modules
and/or pass-through cards are installed.
The following shows the position of slots for installation in the Blade Enclosure
(SIGMABLADE-H).
Refer to the User‟s Guide of the Blade Enclosure to install this card in an appropriate slot. Attach
slot covers to slots that do not have a switch module/pass-through card installed.
Important
● Refer to the User‟s Guide of the Blade Enclosure to install this card in an appropriate slot. If
there are any other switch modules or pass-through cards to be installed, the slot in which
this card is installed depends on the types of the switch modules/pass-through cards and how
they are installed. (See the User‟s Guides of the other modules as well.)
● For information on slot covers that can be attached to the switch module slots, see the User‟s
Guide of the Blade Enclosure.
Slot 1
Slot 2
Slot 3
Slot 5
Slot 7
Slot 4
Slot 6
Slot 8
ID
1
1-4 5-8
9-12
13-16 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ID
1
1-4 5-8
9-12
13-16 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ID 1
1-4 5-8
9-12
13-16 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ID 1
1-4 5-8
9-12
13-16 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ID
1 1-4 5-8
9-12
13-16
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
ID
1 1-4 5-8
9-12
13-16
2 3 4 5 6 7 8 9 10 11 12 13 14 15 16