Talk when called party answers
Placing an Outside Call
Manual Dialling
•
Lift handset and receive dial tone
•
Dial line access code (usually
9
•
Dial number for outside party
•
Converse when called party answers
Speed Dialling
•
Lift handset and receive dial tone
•
Dial
*
followed by the two digit speed dial number (00-19 for station speed
dial, 20-99 for system speed dial).
Talk when called party answers
Redial
You can redial the last external number called by doing the following:
•
Lift handset and receive dial tone
•
Dial # for redial
Converse when called party answers
System Programming
This section covers programming your system for advanced settings that once
programmed don't need to be changed
Please note that all programming must be done with the station "idle" unless specified
otherwise. Idle means that the station is not in use and the receiver is in the "on hook"
position. This programming mode can only be accessed from extensions 10 and 11.
Accessing System Programming
Whilst it is possible to program your system from a standard telephone (I do so all the
time), it is recommended to use a display telephone so that you know where you are in
the program.
To access system programming, you need to do the following:
14