Installation Guide
QX-S5500G Series Ethernet Switches
6-8
c:\> ftp 1.1.1.1
Connected to 1.1.1.1.
220 FTP service ready.
User(1.1.1.1:(none)):abc
331 Password required for abc.
Password:
230 User logged in.
5) Enable the binary file transfer mode.
ftp> binary
200 TYPE is now 8-bit binary.
6) Upload the file (for example,
newest.ipe
) to the root directory in the Flash memory of
the master switch.
ftp> put newest.ipe
200 PORT command successful
150 Connecting to port 10002
226 File successfully transferred
ftp: 32133120 bytes sent in 64.58 secs (497.60 Kbytes/sec).
IV.
TFTP download from a server
To download a file from a TFTP server, for example, the server at 10.10.110.1:
1) Run a TFTP server program on the server, specify the working directory, and copy the
file, for example,
newest.ipe
, to the directory.
2) On the IRF fabric, perform the
tftp
command in user view to download the file to the
root directory in the Flash memory of the master switch.
<Switch> tftp 10.10.110.1 get newest.ipe
Press CTRL+C to abort.
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
100 30.6M 0 30.6M 0 0 143k 0 --:--:-- 0:03:38 --:--:-- 142k
6.4.3 Upgrading the software images
To upgrade the software images:
