5. Using On-Screen Menu
113
[GEOMETRIC CORRECTION]
MODE
Set pattern for correcting distortion. If [OFF] is selected, the [GEOMETRIC CORRECTION] becomes
ineffective.
NOTE:
• If you need to change the [MENU ANGLE], make sure to change it before performing the [GEOMETRIC CORRECTION]. If [MENU
ANGLE] is changed after performing the [GEOMETRIC CORRECTION], corrected values will be reset to the default values.
• This can be set when [3D SETTINGS]
→
[FORMAT] is set to [OFF(2D)].
KEYSTONE
Correct distortion in horizontal and vertical directions.
HORIZONTAL
Adjustments when projecting from a diagonal direction to the screen.
VERTICAL
Adjustments when projecting from the top or bottom direction to the screen.
TILT
Adjusts the distortion when performing trapezoidal correction with the screen moved in the vertical direction
using the lens shift.
THROW RATIO
Adjusts according to the projection ratio of the optional lens used.
Model name of lens unit
Adjustment range
NP11FL
8
NP12ZL
12–15
NP13ZL
15–30
NP14ZL
29–47
NP15ZL
46–71
Model name of lens unit
Adjustment range
NP40ZL
8–11
NP41ZL
13–30
NP43ZL
30–60
NP44ML
3
Summary of Contents for PA1004UL-W
Page 240: ...NEC Display Solutions Ltd 2020...