manualshive.com logo in svg

NEC P547UL, User Manual

Share
Download
NEC P547UL User Manual Download Page 85

4. Using On-Screen Menu

64

CONSTANT BRIGHTNESS OFF

[CONSTANT BRIGHTNESS] mode will be canceled.

ON

Maintains the brightness that is in effect at the time [ON] is selected. Unless [OFF] is 
selected, the same settings will remain in effect even when the projector is turned 
off.
•  To re-adjust the brightness, first turn this setting OFF before making further 

adjustments.

NOTE:
•  [CONSTANT BRIGHTNESS] mode is a function used to maintain the brightness at a 

constant level. Color will not be fixed.

NOTE: 
•  [CONSTANT BRIGHTNESS] can be selected if [ECO MODE] is set to [OFF] and [ADJUST] is set to 50 to 70%.
•  When [CONSTANT BRIGHTNESS] is set to [ON], [ECO MODE] and [ADJUST] cannot be selected.

TIP: 
•  Brightness normally decreases with use, but by selecting [CONSTANT BRIGHTNESS] mode, the projector automatically adjust the 

output based on the projector used time, thereby maintaining a constant brightness throughout the life of the light module.

  However, if output is already at its maximum, brightness will decrease with use.

Using Off Timer [OFF TIMER]

1.  Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 

8:00, 12:00, 16:00.

2.  Press the ENTER button on the remote control.
3.  The remaining time starts counting down.
4.  The projector will turn off after the countdown is complete.

NOTE:
•  To cancel the preset time, set [OFF] for the preset time or turn off the power.
•  When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3 

MINUTES.] message will be displayed on the bottom of the screen.

Setting the date and time [DATE AND TIME SETTINGS] 

Display the start-up screen of MultiPresenter (

→

 page 

148

)

Configuring the menu settings [ADMINISTRATOR MODE]

This allows you to select [MENU MODE], save settings, and set a [KEYWORD] for the [ADMINISTRA-

TOR MODE].

MENU MODE

Select either [BASIC] or [ADVANCED] menu. (

→

 page 

50

) 

NOT SAVE SETTING VALUES

When [ON] is selected, the values of the items configured in the on-screen menu will not be saved.

KEYWORD

Assign a password for the administrator mode. Enter the password using the 

▲▼◀▶

 buttons 

and press the ENTER button. (Up to 10 alphanumeric characters) 

Summary of Contents for P547UL















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands