1
Getting Started
–
7
–
Reference drawings for stand
Please hire an installation service provider (for a fee) for the design and manufacture of a customized stand to be used
for portrait projection. Please ensure that the design complies with the following conditions:
•
Use the 4 screw holes at the back of the projector to secure it to the stand.
Screw hole center dimension: 250 × 200 mm
Screw hole dimension on the projector: M4 with the maximum depth 12 mm
•
Horizontal adjustment mechanism (for example, bolts and nuts in 4 places)
•
Please design the stand so that it does not easily topple over.
The drawing showing the dimensional requirements is not an actual stand design drawing.
25
0
m
m
[
9
.8
4"
]
200mm
[ 7.87" ]
50mm
[ 19.69" ]
[Side View]
[Front View]
Horizontal adjuster
Air exhaust
Air intake
Air intake
Air exhaust
