NEC P474U Page 54 User Manual Download

Page: 54 / 144

4. Using the Viewer

❶

What you can do with the Viewer

The Viewer has the following features.

• When a commercially available USB memory that stores image files is inserted into the USB port (Type A) of the

projector, the Viewer allows you to view the image files on the USB memory.

Even if no computer is available, presentations can be conducted simply with the projector.

• Supported graphic format is JPEG.
• The Viewer displays the thumbnail screen (JPEG Exif only) on which you can jump to any specific image you wish

to project.

• There are two ways of playback for slideshow: manual playback and auto playback. The interval time can be

changed in auto playback.

• The order of displaying images can be set by name, date or size. Ascending or descending order can be selected.
• Images can be rotated by 90 degrees during playback.

Summary of Contents for P474U

















































































































































Search results

Summary of Contents for P474U

Reviews:

Related manuals for P474U

Brands by name

Popular brands

NEC P474U, User Manual

Search results

Summary of Contents for P474U

Reviews:

Related manuals for P474U

Brands by name

Popular brands