6
3. Projecting an Image (Basic Operation)
STA
TU
S
LA
MP
AU
TO
AD
J.
SO
UR
CE
SE
LE
CT
ME
NU
EX
IT
EN
TE
R
FO
CU
S
2
1
STA
TU
S
LA
MP
AU
TOA
DJ.
SO
UR
CE
SELE
CT
ME
NU
EX
IT
EN
TE
R
FO
CU
S
3
4
Adjustable Tilt Foot
Adjustable Tilt
Foot Lever
Adjust the Tilt Foot
1. Lift the front edge of the projector.
CAUTION:
Do not try to touch the ventilation outlet during Tilt Foot adjustment as
it can become heated while the projector is turned on and during its
cool down period after it is turned off.
2. Push up and hold the Adjustable Tilt Foot Lever on the front of
the projector to extend the adjustable tilt foot.
3. Lower the front of the projector to the desired height.
4. Release the Adjustable Tilt Foot Lever to lock the Adjustable tilt
foot.
The tilt foot can be extended up to 1.8 inch/45 mm.
There is approximately 10 degrees (up) of adjustment for the front of
the projector.
Rotate the rear foot to the desired height in order to square the image
on the projection surface.
CAUTION:
• Do not use the tilt-foot for purposes other than originally intended.
Misuses such as using the tilt foot to carry or hang (from the wall or
ceiling) the projector can cause damage to the projector.
Adjustng the left and rght tlt of an mage [Rear foot]
1. Remove the spacer (black rubber) from the rear foot.
Keep the spacer for future use.
2. Rotate the rear foot.
The rear foot can be extended up to 0.4 inch/10 mm. Rotating the rear
foot allows the projector to be placed horizontally.
NOTE:
• Do not extend the rear foot beyond its height limit (0.4 inch/10 mm). Doing so
may cause the rear foot to come out of the projector.
• After using the projector, attach the spacer to the rear foot.
SELE
CT
ME
NU
EXIT
ENT
ER
STAT
US
LAM
P
AUTO
ADJ.
SOU
RCE
FOCU
S
Spacer (black
rubber)
Rear foot
SELE
CT
MEN
U
EXIT
ENT
ER
STAT
US
LAM
P
AUTO
ADJ.
SOU
RCE
FOCU
S
Up
Down
