background image

 

49 

4. Convenient Features 

n

 Turning Off the Image and Sound 

The projected image and sound can be turned off for short periods of time with the remote 
control. This feature is useful for breaking up presentations or for other brief interruptions in 
projections. To turn off the picture and image, refer to the following guide. 

1. Press 

the 

PIC-MUTE

 button on the remote control once  

(see 

s

 Part Names of the Remote Control on page

 12

). 

2.  To resume projection, press the 

PIC-MUTE

 button once more. 

Note:

 

For extended periods of time it is recommended that the projector be powered off. 

o

 Freezing a Picture 

The projected image can be frozen for short periods of time via the remote control. This fea-
ture is useful for capturing still images from movies or freezing an animation at a particular 
point. To freeze the projected image, refer to the following guide. 

1. Press 

the 

Freeze

 button on the remote control once  

(see 

s

 Part Names of the Remote Control on page 

12

). 

2.  The screen freezes. 

3.  To resume, press the 

Freeze

 button once more. 

Note:

 

For extended periods of time it is recommended that the projector be powered off. 

Downloaded From projector-manual.com NEC Manuals

Summary of Contents for NP4001
























































































































































Reviews: