NEC NP4001, User Manual

Page: 143 / 151

8. Specifications
131
t
Operation Using HTTP Browser
Overview
The use of HTTP server functions will allow control of the projector from a web browser
without the installation of special software. Please be sure to use “Microsoft Internet Ex-
plorer 4.x” or a higher version for the web browser. (This device uses “JavaScript” and
“Cookies” and the browser should be set to accept these functions. The setting method
will vary depending on the version of browser. Please refer to the help files and the other
information provided in your software).
Access is gained to the HTTP server functions by specifying the following address in the
entry column of the URL:
http:// <the projector’s IP address> /index.html
http:// <the projector's IP address> /lanconf.html
Note:
The display or button responses can be slowed down or operation may not be ac-
cepted depending the settings of your network. Should this happen, consult your
network administrator. The projector may not respond if its buttons are repeatedly
pressed in rapid intervals. Should this happen, wait a moment and repeat. If you
still can’t get any response, turn off and back on the projector.
Preparation Before Use
Make network connections, set up the projector and confirm that it is complete before
engaging in browser operations (see LAN Settings on page
91 for more information).
Operation with a browser that uses a proxy server may not be possible depending on
the type of proxy server and the setting method. Although the type of proxy server will be
a factor, it is possible that items that have actually been set will not be displayed de-
pending on the effectiveness of the cache, and the contents set from the browser may
not be reflected in operation. It is recommended that a proxy server not be used unless it
is unavoidable.
Handling of the Address for Operation via a Browser
Regarding the actual address that is entered for the address or entered to the URL col-
umn when operation of the projector is via a browser, the host name can be used as it is
when the host name corresponding to the IP address of the projector has been regis-
tered to the domain name server by a network administrator, or the host name
corresponding to the IP address of the projector has been set in the “HOSTS” file of the
computer being used.
Example 1:
When the host name of the projector has been set to pj.nec.co.jp ,
http://pj.nec.co.jp/index.html is specified for the address or the entry column of the URL.
Example 2:
Downloaded From projector-manual.com NEC Manuals